Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Andrews, TX
We provide independent DuraFlex service across Andrews, TX, for homeowners whose flexible stainless liners, direct-vent fireplaces and factory-built fireboxes need cleaning, inspection or repair. What makes our DuraFlex work here different is that we know how this equipment behaves through Andrews’ long idle season, when a flue sits unused for months and then gets fired hard overnight. We’re an independent shop, not affiliated with or authorized by DuraFlex, and our technicians have up to 12 years of experience reading these systems. Call (833) 486-7503. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Andrews Residents Choose Us for DuraFlex Service
DuraFlex systems are common enough that a generalist sweep can look at one. Knowing what’s wrong with it is a different job. A flexible stainless liner, a direct-vent assembly and a factory-built firebox all fail in different ways, and the difference between a failed component and an installation issue often comes down to hands-on familiarity with the brand’s parts and how they fit.
Our technicians have up to 12 years of experience on these liners and components, daily, which means we can usually tell you whether you’re looking at a maintenance gap or something that needs replacing.
On the Andrews side, we work with the housing you actually live in: 1960s and 1970s ranch homes from the oil boom years, and the manufactured and modular homes on the outskirts where prefab and factory-built fireplaces are the norm. Both need specialized inspection and cleaning rather than traditional masonry work.
Scheduling is straightforward. We book a sweep, we tell you what we found, and the written estimate sets the price before any repair begins.
When you need Andrews chimney care that starts with a real diagnosis, that’s where we come in.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Andrews
- Flex-liner seam separation. Repeated short, hot burns – the pattern of an Andrews fireplace that gets lit a handful of times a season – can pull seams and joints apart or crack them. Once a seam opens, creosote bypasses the liner and sits against the chimney structure where a sweep can’t see it without a proper inspection.
- Corroded direct-vent inner liner. High-efficiency direct-vent systems run cooler and produce more condensation. When the termination cap clogs with caliche dust and airflow gets restricted, that corrosive flue gas has nowhere to go and eats into the inner liner.
- Cracked refractory panels and warped baffles. Factory-built fireboxes in manufactured homes take a beating when a homeowner over-fires on the first genuinely cold night after months of nothing. The refractory can crack and the baffle can warp, both of which change how the unit burns.
- Loose top plates and failed cap sealant. West Texas wind and grit work on these connections continuously. A loosened top plate or a sealant bead that has let go allows dust and moisture into the flue, and rust tends to start right at the liner connection.
- Dust-packed screens and bird nests. Nine months of open cap is an invitation. By the time cold weather arrives the screen is often packed solid and the flue may have nesting material inside, which is exactly when draft problems show up.
DuraFlex Service in Andrews: What Local Conditions Mean for Your Equipment
Andrews sits on the Permian Basin, and that shapes the work more than most homeowners expect. Winters here bring sudden blue-norther cold snaps nobody prepares for year-round, so a fireplace can sit idle through nine months of heat and then get fired up overnight when temperatures drop 40 degrees. That long dormant stretch is the problem. DuraFlex direct-vent and flex-liner systems sit through it with bird nests, dust-packed caps and hard-cured creosote left from the previous winter’s short, hot burns, and the first cold snap triggers a rush of calls from homeowners who discover a blocked or cracked liner only when they try to light a fire. The arid high-plains air and low humidity mean creosote cures hard instead of staying soft, so cracks develop inside the liner between burn seasons, and windblown caliche grit settles into the assembly all summer. A typical DuraFlex-equipped home here – a 1970s ranch off the main grid, or a manufactured home on the outskirts – will often show smoke rollback or a weak draft the first time it’s lit. Inspection usually finds a cap screen packed with dust, plus creosote that has cured hard and cracked inside the flex liner. A qualified local pro performs a Level 2 inspection, sweeps the flue, replaces the clogged cap and checks liner seams for separation before the system goes back into service.
DuraFlex Models & Products We Service in Andrews
We service the DuraFlex equipment Andrews homes actually have: ReliaGlo direct-vent gas fireplace systems, Stainless Steel Flex Liner kits installed for wood inserts, ProFlex flexible chimney liner systems, and the components that make up factory-built wood-burning fireplaces and inserts. If you have a flex liner or a direct-vent assembly, we can inspect it, clean it and tell you what’s failing.
On parts, our approach is simple. Critical safety components – liners, top plates and caps – get OEM DuraFlex parts whenever they’re available, because aftermarket fitment on direct-vent and flex-liner systems can compromise the clearances the system was built around. For cosmetic pieces or parts that are out of production, a quality equivalent is acceptable if it meets the same temperature and clearance ratings. Nothing gets substituted without you knowing why.
Our broader DuraFlex service background means we’ve handled these systems often enough to recognize a part that fits from one that’s merely close.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Andrews
Pricing is set per job by the written estimate. What drives the number is the condition of the system and the access to it: a standard sweep of a sound liner is one thing, a Level 2 inspection with camera work on a separated flex liner is another, and cap replacement or refractory work adds materials on top. Height and roof access matter, and so does whether your unit is a factory-built firebox in a manufactured home or a masonry chimney with an insert liner.
The free estimate includes the inspection findings and a clear recommendation – including the cases where we tell you work can safely wait.
- Chimney sweep and creosote removal: quoted per flue after inspection
- Level 2 inspection with camera documentation: quoted per system
- Cap replacement and moisture protection: quoted with the specific DuraFlex part
- Liner repair or replacement: quoted after seam and clearance checks
Nothing gets recommended that our camera didn’t show us, and you see the footage yourself. Call (833) 486-7503 for an exact quote – estimates are free.
Serving Andrews, TX – Our Local Coverage Area
We serve Andrews and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Andrews
A restricted termination cap is the usual cause. Caliche dust and grit pack the cap screen over the idle months, airflow drops, and the unit runs rich and smells off. A Level 2 inspection will confirm it before anything is replaced. Call (833) 486-7503 for an exact quote – estimates are free.
Once a year, ideally before the first cold snap, is the right rhythm here. Occasional use doesn’t mean low risk in this climate: the nine-month idle stretch lets creosote cure hard and cracks form, and debris builds up while the system sits. An annual inspection catches seam separation before it becomes a liner replacement.
Often they can be repaired with the right DuraFlex components. Cracked refractory and warped baffles in factory-built units are replaceable in many cases; what decides it is whether the firebox shell itself is sound. We inspect first and tell you which situation you’re in.
Short, hot burns are exactly what produces it. A fire that runs hot and then dies down repeatedly deposits creosote that cures hard in dry air, and glazed creosote doesn’t brush off like soft soot – it needs proper removal. Call (833) 486-7503 for an exact quote – estimates are free.
For most homes here, yes. Persistent wind, caliche grit and nesting birds are the two things a good cap handles, and a properly fitted DuraFlex or Gelco cap protects the liner connection from moisture and rust at the same time. We’ll size it to your flue rather than improvising a fit.
Service Areas Near Andrews
We serve DuraFlex owners across the surrounding area, including Odessa, Midland, Crane, Thorntonville, Southwest Sandhill and McKinney Acres, and we handle chimney work in Odessa as well as Andrews. If you’re not sure whether your address is in range, call and we’ll tell you straight.
Book Your DuraFlex Service in Andrews Today
If your DuraFlex system sat idle all summer and you’re about to light the first fire of the season, get it looked at first. We’ll inspect, sweep and repair under one roof, with professional-grade parts and a written estimate before any work starts. Call (833) 486-7503. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Odessa.