Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Stanton, TX
If your fireplace has gone a season or two without a look, a chimney inspection in Stanton is the place to start. Most of the housing stock here is modest single-story ranch and pier-and-beam construction from the 1950s through the 1980s, and a lot of those homes still run on the original masonry fireplace and clay tile liner. Add caliche dust and wind-blown sand off the surrounding plains and you get flues that load up with grit and glazed creosote faster than most homeowners expect. We work on chimney systems only – inspection, sweep, and repair – and we diagnose before we recommend anything. Call (833) 486-7503 to book.
Why Stanton Homes Are Different
Stanton sits in a semi-arid stretch of the Permian Basin, and the climate shapes the work here in ways it doesn’t in wetter parts of the state. Dust storms are a regular event. Wind-driven grit finds its way into fireboxes and smoke shelves even when the fireplace hasn’t been used in months, and it packs into chimney caps and spark arrestors – we routinely clear caliche silt out of screens on the north side of town after a spring blow. When those screens clog, the flue stops drafting and smoke backs into the room.
The thermal cycling matters too. Wide swings between warm afternoons and cold nights mean creosote can glaze and harden quickly between burns, which makes it harder to brush out and more of a fire concern. And because cold snaps here tend to arrive fast, homeowners burn hardwood and scrap wood heavily for short stretches, which is exactly the pattern that builds creosote without anyone noticing. Manufactured homes on the outskirts add a second category of work: factory-built metal chimneys that need poly brushes and specific clearances, and that generic cleaning outfits often skip entirely. Whether your house is a ranch with a clay tile liner or a manufactured home with a metal flue, the inspection tells us which one we’re dealing with.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Stanton Services
Two calls come in more than any other from Stanton homeowners: a sweep when the flue is loaded up, and a repair when something has cracked, rusted, or come loose.
Chimney Sweep in Stanton
A sweep here is less about cosmetics and more about fire safety. In Stanton, heavy seasonal burning combined with dust infiltration means flues accumulate both creosote and grit, and the two behave differently – creosote glazes onto the liner, while sand and caliche silt settle in the smoke shelf and damper area. We brush the flue with the right tool for the liner type, whether that’s a rotary brush on clay tile or a poly brush on a factory-built metal chimney, then vacuum the firebox so nothing ends up in your living room. For a closer look at what a full visit involves, see chimney sweep.
Chimney Repair in Stanton
Repair work in Stanton usually comes down to two things: cracked clay tile from decades of thermal cycling, and moisture getting into masonry crowns and caps. Both are fixable, and both get worse if they wait. We reline with DuraFlex stainless systems when the existing liner is compromised, resurface fireboxes and flues with HeatShield when the masonry is still sound enough to restore, and install Famco and Gelco caps and covers to keep water and wildlife out. Because we carry liner components on repair visits, relining can often happen in the same trip rather than as a separate job. Details are on our chimney repair page.
Chimney Inspection in Stanton
Chimney Inspection in Stanton starts with the housing. Homes built between the 1950s and 1980s with original masonry fireplaces almost always have clay tile liners, and after decades of heating and cooling those tiles develop hairline cracks that aren’t visible from the hearth. A camera inspection is how you find out whether the liner is still intact or whether heat and gases have a path into the framing. The other half of the picture is dust: wind-blown sand and caliche silt settle into smoke shelves and cap screens, narrowing the flue and causing backdrafts. You can read a fuller description of what our Chimney Inspection covers before you book.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if you’ve noticed smoke rolling into the room instead of up the flue, a damper that sticks or won’t seal, or visible cracking in the firebox brick or mortar joints.
What it costs in Stanton
A fireplace inspection in Stanton typically runs $89 – $150, though a full Level 2 camera inspection with a written report is higher.
How we do it
We check the firebox, damper, smoke shelf, and hearth from inside, then compare what we find against the flue condition from the top, and photograph anything that needs attention.
Chimney Flue Inspection
Signs you need it
A flue inspection is overdue if you’ve had a chimney fire, noticed heavy creosote buildup, or moved into a Stanton home where you don’t know the last time the flue was looked at.
What it costs in Stanton
Flue inspection with camera typically falls in the $150 – $275 range in Stanton, and the written report is included.
How we do it
We run a camera down the full length of the flue to check for cracked tiles, gaps in the joints, rusted metal sections, and offset blockages, then show you the footage and the findings in writing.
What Chimney Inspection Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Fireplace inspection (Level 1) | $89 – $150 |
| Flue inspection with camera | $150 – $275 |
| Level 2 inspection with written report | $200 – $400 |
Do I need a Level 2 chimney inspection in Stanton?
Usually, yes, if you’ve had a chimney fire, bought the home without records, or changed the appliance or liner. A Level 1 visual check alone won’t reveal hidden tile cracks; the camera will. Call (833) 486-7503 for an exact quote on your Stanton home.
What does a chimney fire do to a flue?
A chimney fire can crack clay tiles and warp metal liners, letting heat reach framing that was never meant to see it. Even a small one leaves damage a camera will find, which is why we inspect after any suspected fire.
Brands We Service in Stanton
We work with professional-grade chimney components from Olympia Chimney, DuraFlex, Famco, and Copperfield, because specification-grade materials hold up where hardware-store parts fail. Those brands let us match the right liner, cap, and cover to your Stanton flue. Read more about our brands and how we source them for each job.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Stanton, TX
| Service | Typical range in Stanton |
|---|---|
| Fireplace inspection (Level 1) | $89 – $150 |
| Flue inspection with camera | $150 – $275 |
| Level 2 inspection with written report | $200 – $400 |
| Standard chimney sweep | $150 – $300 |
| Sweep with heavy creosote removal | $250 – $450 |
| Chimney cap installation | $150 – $400 |
| Crown repair or rebuild | $350 – $900 |
| Firebox resurfacing with HeatShield | $600 – $1,800 |
| Stainless liner relining (DuraFlex) | $1,800 – $4,500 |
In Stanton, price climbs with the amount of creosote that has glazed on (harder to remove than loose soot) and with liner work, since relining is the largest single cost. We give you the price up front and in writing before any work begins, so the number you agree to is the number you pay.
Neighborhoods We Serve in Stanton
We cover Stanton and the surrounding stretch of Martin County, from the older ranch homes close to the center of town out to the manufactured homes on the outskirts. The mix matters: masonry fireplaces with clay tile liners need a different approach than factory-built metal chimneys, and we handle both. Response time depends on the day’s route, so call and we’ll book you into the next opening. The areas we work most include:
- Central Stanton near the courthouse square
- The older single-story ranch blocks on the north side of town
- Pier-and-beam homes along the established residential streets
- Manufactured homes on the outskirts with factory-built chimneys
- Rural properties within the 79782 area
Service Area – Cities Near Stanton
Stanton sits between several larger West Texas communities, and we cover them all. If you’re outside Stanton, we also work in Midland, TX, Odessa, TX, Andrews, TX, and McKinney Acres, TX. Same climate, same dust, same clay tile and metal chimneys – the inspection-first approach carries over. Call (833) 486-7503 to book in any of these areas.
Serving Stanton, TX – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Stanton
Yes, Stanton is one of our core service areas. We handle inspection, sweep, and repair for homes here, including both masonry fireplaces and manufacturer-built metal chimneys. Call (833) 486-7503 to schedule.
A standard sweep doesn’t, but relining or structural repair sometimes does. Most cities require a permit for liner replacement, so it’s worth asking Stanton’s building department before work starts – we can point you in the right direction.
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside those hours gets booked into the next opening. Call (833) 486-7503 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Stanton Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Claudia Hernandez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Neil Novak"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Xavier Jackson