Chimney Repair in Stanton, TX | Chimney Sweep Odessa

Chimney Repair in Stanton - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Stanton

If your fireplace has started smoking into the room, your chimney crown has cracked, or you’ve spotted loose mortar around the firebox, you’re in the right place. Chimney repair in Stanton is our focus here, and it starts with a camera inspection before anyone recommends a single repair. We connect homeowners across Stanton with experienced technicians – our technicians have up to 12 years of experience – who work on the specific chimney types this town is built with.

Call (833) 486-7503

Stanton’s housing stock tells the story: modest single-story ranch and pier-and-beam homes from the 1950s through the 1980s, many still carrying their original masonry fireplaces and clay-tile flues. Those decades of heating and cooling have consequences, and a proper repair plan starts with seeing them. Call (833) 486-7503 for a free estimate. We answer 24/7.

Why Stanton Homeowners Call Chimney Sweep Odessa for Chimney Repair

We’re a chimney specialist, not a general handyman outfit. Sweep, repair, and inspection are handled under one roof, which matters when the crack you can see isn’t the only problem in the system. A technician who sweeps your flue can also read the mortar joints, check the crown, and pull a camera through the liner in the same visit – no coordinating three contractors for one chimney.

Stanton customers call us because the diagnosis is transparent. We run a Level 2 inspection with a camera and show you what’s on-screen: the cracked tiles, the spalled mortar in the smoke chamber, the caliche silt packed into the cap on the north side of town. Nothing gets recommended without evidence you can see for yourself.

We work with professional-grade materials from brands like HeatShield, DuraFlex, and Olympia Chimney, the same components commercial contractors specify – not whatever’s on a hardware store shelf. Response to Stanton is quick, and the estimate is free. Fast dispatch from 7am to 7pm, Sunday through Friday.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Liner Installation in Stanton

Chimney liner installation in Stanton is one of the most common repairs we scope, largely because the original clay-tile flues in older ranches here have cracked from decades of thermal cycling. When tiles crack, gaps open between them. Combustion gases and creosote can reach the masonry around them, and the flue stops doing the one job it exists for. A new stainless liner – often a DuraFlex or Olympia Chimney system sized to the appliance – restores a continuous, properly sized flue.

Sizing the liner to the appliance

A wood-burning fireplace, a wood stove, and a gas appliance each need a different flue diameter to draft correctly. A liner that’s too large runs cold and collects creosote; too small and the appliance won’t vent. The inspection determines which size the stack actually needs.

Same-visit relining capability

Because DuraFlex liner systems are part of our repair toolkit, a relining can often be completed during the repair visit rather than scheduled as a separate job. That keeps one crew accountable from diagnosis through installation, and you aren’t left with a torn-apart chimney waiting on a second company.

Chimney Flashing Repair in Stanton

Chimney flashing repair in Stanton addresses the metal that seals the joint where the chimney meets the roof, and it’s the leak source we chase most often on the older ranch houses here. Flashing takes the worst of the wind and sun on an exposed West Texas roofline, and when the seal fails, water finds the attic. Repair means resetting or replacing the flashing and sealing it against the roof covering, not smearing caulk over a gap that’s already opened.

You’ll know flashing is failing when you see water staining on ceiling boards near the chimney, rust along the metal, or daylight through the joint. Catching it early keeps the repair to the flashing itself; letting it run can rot the roof deck and the framing around the stack.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 486-7503

How we confirm a flashing leak

We inspect the joint from the roof side and inside the attic where accessible, so the repair targets the actual breach. If moisture looks like it’s coming from the crown or the cap instead, that changes the fix, and the camera inspection tells you which.

Sealing against wind-driven grit

The same dust that packs Stanton caps will work its way into a loose flashing seam. A properly set flashing sheds both water and grit, and it protects the masonry below from the slow erosion that follows a chronic leak.

Trusted Brands We Service in Stanton

The components that go into a repair decide how long it lasts. We specify professional-grade chimney products – DuraFlex for stainless liner systems, HeatShield for firebox and flue resurfacing, Olympia Chimney for liner and venting components, and Famco and Copperfield for caps and covers – all specified by contractors who care what’s behind the wall. That specificity is the difference between a repair that holds and a patch that fails on the next dust storm. We don’t claim parts stock; we scope the repair and order the right component for your stack. Call (833) 486-7503 to get a repair scoped.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 486-7503

Common Chimney Repair Problems We See in Stanton Homes

  • Cracked clay-tile flue liners mistaken for a sweeping problem. Homeowners here will sweep again and again, chasing a smoky backdraft that won’t clear, until a camera inspection reveals the cracks between tiles. The gaps let gases escape the flue, and no amount of brushing fixes that.
  • Spalling mortar in the smoke chamber. It’s easy to ignore because the fireplace “still works,” but loose mortar lets creosote collect behind it, which raises fire risk inside the most overlooked part of the system.
  • Caliche silt packed into caps and spark arrestors on the north side of town. After spring dust storms, technicians routinely find screens clogged with fine silt, which chokes the draft and produces smoky backdrafts that mimic a blocked flue.
  • Factory-built metal chimneys on manufactured homes at the outskirts. These need specialized poly brushes and are often skipped by generic cleaning services, so creosote builds up unmanaged in a system that isn’t built for heavy firing.

Pricing for Chimney Repair in Stanton, TX

Repair pricing in Stanton runs by the job, and the written estimate is what sets the final number. Typical ranges to expect: mortar repointing runs around $250 to $600 depending on how many joints are involved; spalling brick repair is roughly $300 to $900; chimney waterproofing lands near $250 to $550; and flashing repair is typically $200 to $500. A full relining with a stainless system is a larger project, and the estimate reflects the liner length and size for your appliance. What moves the number is the extent of the damage, whether the repair is at the crown or in the smoke chamber, and how much masonry has to come apart to do it right.

The estimate is free, and nothing is recommended until the camera inspection shows the reason. If work can safely wait, we’ll tell you that plainly. Call (833) 486-7503 for an exact quote.

We Also Serve Cities Near Stanton

We take care of chimneys beyond Stanton too. Homeowners in nearby Midland and Odessa call on us for liner and flashing work, and we cover Andrews and McKinney Acres as well. If you’re just up the road, the same inspection-first process applies. Our chimney repair service is the place to start whether you’re in Stanton or a neighboring town.

Serving Stanton, TX – Our Local Coverage Area

We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Stanton

Why Stanton Chooses Chimney Sweep Odessa

We set the standard for chimney repair in Stanton.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Stanton

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Stanton Customers Say

Trusted by homeowners across Stanton and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Claudia Hernandez
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Neil Novak
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Xavier Jackson

Ready for Chimney Repair in Stanton?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Stanton.

(833) 486-7503

Request a Free Estimate in Stanton

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7